TEM Air Handler Quiz

The TEM6 Air Handler can be matched up with the Variable Speed Outdoor product with the use of relay panel.

Heat Strip electrical data can be found in the Installer’s Guide for the TEM4 and TEM6.

You must not have an open clean out in the primary drain line before the p-trap on the TEM4 and TEM6 air handler.

It is important to follow the different coil configuration instructions found in the installation guide for the TEM4 and TEM6 to operate correctly.

The TEM4 is rated up to a Total System Static Pressure of 0.07” W.C.

Blower speed is adjusted using dip switches on which TEM model?

When using a single speed outdoor unit with the TEM6, you must wire the Y1 from the condenser to which wire on the TEM6?

Side returns are allowed on the TEM Air Handlers.

The TEM Air Handler has a 4-way multi poise cabinet.

You can find troubleshooting videos for the TEM air handlers like the VS 16 Pin Motor on the website www.fieldtechhelp.com.