TAM9 Air Handler
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
Error codes and test functions can be found in the CDA on the front of the coil compartment door.
CorrectIncorrect -
Question 2 of 10
2. Question
A video demonstrating Programming the TAM9 can be found on www.fieldtechhelp.com.
CorrectIncorrect -
Question 3 of 10
3. Question
Troubleshooting help for the TAM9 can be found where?
CorrectIncorrect -
Question 4 of 10
4. Question
Where can the EEV open-close test be initiated on the TAM9?
CorrectIncorrect -
Question 5 of 10
5. Question
The RBD pins located in the top left-hand side of the AFC board is where the communication wires are connected for normal operation.
CorrectIncorrect -
Question 6 of 10
6. Question
Which sensor needs to be removed prior to brazing?
CorrectIncorrect -
Question 7 of 10
7. Question
You should only attach screws to the TAM9 cabinet where it is specified in the Installer’s Guide.
CorrectIncorrect -
Question 8 of 10
8. Question
You can find a video to assist you with diagnosing and troubleshooting the serial port motor on the TAM9 at www.fieldtechhelp.com.
CorrectIncorrect -
Question 9 of 10
9. Question
The cabinet for the TAM9 can be easily disassembled for ease of installation.
CorrectIncorrect -
Question 10 of 10
10. Question
The Supplemental Heat Strips must be programmed into the CDA on the front of the TAM9 coil cover to operate.
CorrectIncorrect